background image

Use this option for persons allergic to detergents

and in areas where the water is soft.

The related indicator comes on.

1) 

SETTINGS

PERMANENT EXTRA RINSE 
With this option you can permanently have an extra

rinse when you set a new programme.
• To activate/deactivate this option touch the

buttons   and   at the same time until the
indicator   comes on/goes off.

CHILD LOCK 
With this option you can prevent that the children

play with the control panel.
• To activate/deactivate this option, touch the

buttons   and   at the same time until the
indicator   comes on/goes off.

Activate this option after you touch the button 

 :

the buttons are locked (except for the button   ) .

This option stays active even when you

switch off the appliance.

ACOUSTIC SIGNALS
The acoustic signals operate when:
• The programme is completed.

• The appliance has a malfunction.
To deactivate/activate the acoustic signals,
touch the buttons   and   at the same time for 4

seconds.

If you deactivate the acoustic signals,

they continue operate when the

appliance has a malfunction.

BEFORE FIRST USE

WARNING! Refer to Safety chapters.

BEFORE FIRST USE
1. 
Put a small quantity of detergent in the

compartment for washing phase.

2. Set and start a programme for cotton at the

highest temperature without laundry.

This removes all possible dirt from the drum and the

tub.

CLOCK SETTING

1. Touch the button   and the button   at the

same time for some seconds.

The hour digits flash.
2. Touch the button   to change (or confirm) the

hour. The hours change with the steps of one

hour.

If you keep the button   pressed

the digits change in a quicker way.

3. Touch the button 

 to confirm the selection.

The minute digits flash.
4. Touch the button   to change (or confirm) the

minutes. The minutes change with the steps of

one minute.

5. Touch the button 

 to confirm the selection.

The appliance enters automatically in

clock setting mode when:

• you activate the appliance for the first time after

the installation,

• you activate the appliance for the first time after

it has been unplugged for more than two weeks,

• you did not confirm the time selection within 15

seconds period from last button touching,

• you switched the appliance off before

confirming the time.

1) See in "Settings" how to activate this option.

10

Summary of Contents for ZWF 01487W





















Reviews: