Zanussi ZV 240 R Instruction Booklet Download Page 3

10

Warnings 

9

Use 

10

Cleaning the interior 

10

Control panel

10

Operation

10

Temperature regulation

11

Fast freezing

11

Warning light

11

Freezing fresh food

11

Storage of frozen food

11

Thawing

11

Ice-cube production

12

Hints

12

Hints for freezing

12

Hints for storage of frozen food

12

Maintenance

13

Periodic cleaning

13

Periods of no operation

13

Defrosting

13

Customer service and spare parts

14

Installation

14

Location

14

Electrical connection

14

Rear spacers

15

Door reversal

15

Reversing the quick-freezing compartment door  15

Cleaning the interior

Before using the appliance for the first time, wash
the interior and all internal accessories with luke-
warm water and some neutral soap so as to remove
the typical smell of a brand-new product, then dry
thoroughly.

Do not use detergents or abrasive
powders, as these will damage the finish.

CONTENTS

USE

This freezer has been marked with the  

symbol, which means that it is suited to the freezing of fresh

foods, the conservation of frozen foods and the production of ice-cubes.

The control panel

4

3

A B C

D

S

N

S

E

A.

Function indicator light 

B.

Quick-freezing indicator light 

C.

Temperature alarm light 

D.

N/S knob 

E.

Thermostat knob

Operation

Insert the plug into the wall socket.  The function
indicator light will light up, indicating that the
appliance is in operation.

Turn the thermostat knob (E) to the right to a
medium setting (the temperature alarm light (C) will
light up). For the satisfactory conservation of frozen
foods, the freezerÕs internal temperature must be
lower than -18¡C.

Summary of Contents for ZV 240 R









Reviews: