D517
135
185
170
220
600
820
870
D518
100
150
820
870
20
÷
80
D546
min.
50cm
2
100
÷
135
150
÷
185
820
870
D520
Fig. 11
Fig. 12
Fig. 13
Fig. 14
Fig. 11
Once the door has been correctly aligned,
tighten the holding nuts on the fixing brackets
and attach the appliance to the adjacent units
and the bottom of the work surface (Fig. 11).
Fig. 12
If the appliance has been fitted into a space 820
mm high and the maximum height of the base
plate is 100 mm, fit the front cover plate by
pushing the two vertical lugs into the
rectangular holes on the bottom side of the
ventilation duct until they click. The plate can be
adjusted backwards or forwards in the holes
(Fig. 12).
Fig. 13
If the base plate is between 100 and 135 mm
high, cut it as shown in Fig. 14 and mount as
described above. If the base plate is between
135 and 170 mm high, cut it as shown in Fig.
12.
Fig. 14
If the appliance has been fitted into a space 870
mm high and the maximum height of the base
plate is 150 mm, fit the front cover plate as
described in Fig. 13. If the base plate is
between 150 and 185 mm high, cut it as shown
in Fig. 14. If the base plate is between 185 and
220 mm high, cut it as shown in Fig. 12.
45
