DESCRIPTION OF THE APPLIANCE
OPERATION
Before use
Remove all securing tapes. Wash inside the appli-
ance with lukewarm water and bicarbonate of soda
(5 ml to 0.5 litre of water). Do not use soap or deter-
gent as the smell may linger. Dry thoroughly.
Setting the temperature
The temperature inside the refrigerator is regulated
by a thermostat with 6 temperature positions and
one «OFF» (O) position.
Position 1 = minimum coldness
Position 6 = maximum coldness
Turn the thermostat dial to the required position.
An intermediate position is usually the most suitable,
although the temperature will be affected by:
l
Room temperature
l
How often the door is opened
l
How much food is stored
l
Position of the appliance
In determining the correct temperature control set-
ting all these factors have to be considered and
some experimentation may be necessary.
When altering the temperature setting, allow 24
hours for the temperature to stablise before making
further changes.
➀
Dairy compartment
➁
Movable shelf
➂
Bottle storage shelf
➃
Salad bin
➄
Storage shelves
➅
Thermostat control
➀
➁
➂
➃
➄
➅
4
■
When unplugging always pull the plug from the
mains socket, do not pull on the cable.
Servicing
■
This product should be serviced by an authorised
engineer and only genuine spare parts should be
used.
■
Under no circumstances should you attempt to
repair the appliance yourself. Repairs carrier out
by inexperienced persons may cause injury or
serious malfunctioning. Contact your local
Service Force Centre.
At the end of the Appliance Life
■
When disposing of your appliance use an autho-
rised disposal site.
■
Remove the plug and ensure that any locks or
catches are removed, to prevent young children
being trapped inside.
