background image

19

t

Periods of non-operation

When the appliance is not in use for long periods, take
the following precautions:

remove the plug from the wall socket;

remove all food:

defrost and clean the interior and all accessories;

leave the door ajar to allow air to circulate to prevent
unpleasant smells.

Interior light

The light bulb inside the refrigerator compartment can
be reached as follows:

1. unscrew the light cover securing screws;

2. unhook the moving part by pressing it as shown in

the figure.

If the door is open and the light does not come on,
check that the bulb is properly screwed in; if it still
does not work, replace the bulb with one of the same
power.
The maximum rating is shown on the light cover.

S.I.013

3

2

1

D411

Periodic cleaning

Never use metal objects for clearing your appliance as
it may get damaged. Clean the inside with warm water
and bicarbonate of soda. Rinse and dry thoroughly.

The appliance is equipped with an air inlet filter (1)
and an air outlet duct (2) on the ventilation grid. Keep
clean to guarantee good ventilation and good working
order of the appliance.

The filter can be removed and washed with water, as
follows:
1. Pinch flaps (a) and (b) with fingers
2. Pull the filter down.
3. Pull the filter out.
To replace the filter reverse the process.

The appliance is equipped with a ventilation grid. Keep
clean to guarantee good ventilation and good working
order of the appliance.
An accumulation of dust will affect the performance of
the appliance and cause excessive electricity
consumption.
The structure of the appliance permits cleaning of the
rear zone close to the wall, using a vacuum cleaner.

1. Remove the plinth (1), then the ventilation grid (2);

2. Carefully pull the air deflector out (3), checking that

there is no water left from the defrosting.

S.I.012

2

1

a

b

Summary of Contents for ZU 9145












Reviews: