6 *
9
7
10
*
if necessary (approx. once every 6 months)
remove the fluff from the heat exchanger using
the sponge supplied (put on rubber gloves)
Cleaning the drum
Caution!
Do not use abrasives or steel
wool to clean the drum.
Lime in the water or cleaning agents may
form a barely visible lining on the inside of
the drum. The degree to which the laundry has
been dried is then no longer detected reliably.
The laundry is damper than expected when re-
moved from the appliance.
Use a standard domestic cleaner (e.g. vinegar-
based cleaner) to wipe down the inside of the
drum and drum ribs.
Clean control panel and housing
Caution!
Do not use furniture cleaners or
aggressive cleaning agents to clean the
machine.
Use a damp cloth to wipe down the control
panel and housing.
What to do if ...
Troubleshooting by yourself
Problem
1)
Possible cause
Remedy
Dryer does not
work.
Dryer not connected to mains supply.
Plug in at mains socket. Check fuse in fuse
box (domestic installation).
Loading door opened.
Close loading door
The START PAUSE button not pressed.
Press the START PAUSE button.
Unsatisfactory
drying results.
Incorrect programme set.
Set suitable programme.
2)
Fluff filters clogged.
Clean fluff filters.
3)
Heat exchanger clogged.
Clean heat exchanger.
3)
Max. loading exceeded.
Respect max. loading volume.
Covered ventilation grill.
Uncover ventilation grill in base area.
Residue inside the drum.
Clean the drum inside.
High water hardness.
Set suitable water hardness
4)
.
Loading door
does not close
Filters not locked in place.
Install fine filter and/or snap course filter into
place.
Err
(
Error
) on
the LCD.
5)
Attempt to change parameters after start of
the programme.
Turn the dryer off and on. Set requested pa-
rameters.
No drum light
Programme selector in OFF position.
Turn it to DRUM LIGHT (if available) or to
any programme.
Defective light bulb.
Replace light bulb (see next section).
26
www.zanussi.com
Summary of Contents for ZTH485
Page 58: ...58 www zanussi com ...
Page 59: ...59 www zanussi com ...