14
Operating sequencee
Before using your tumble dryer for the first time, we recommend to place a few
dampclothsinside the appliance and dry for 30 minutes.
There may be dust inside a brand new tumble dryer.
Drying
1. Connect the
appliance.
2. Open the door
(see picture).
3. Load the items
one at a time,
shaking them
out loosely.
4. Close the door.
Please check
the laundry does
not get caught
between the
door and filter.
5. Select the drying
programme or
time. The light
of the
button
flashes and the
display shows
the duration of
the programme.
6. If required, press
the
button
and/or the
button.
7. Select the
if
required. The
selected delay
appears on the
display for 2
seconds, then
the duration of
the selected
programme is
displayed.
8. Press the
button: the
corresponding
light stops
flashing and
drying starts.
If you have
selected the
, the
machine begins
its countdown.
The drum turns
alternately in
both directions
during drying.
All drying
programmes
end with a 10
minute cooling
phase.
You may remove
the laundry after
this phase.
The and
lights illuminate
and the buzzer
sounds
The display shows
a static zero.
9. If the laundry is
not removed at
the end of the
cycle, the dryer
performs an
anti-creasing
phase (duration:
30 minutes
maximum).
If you do not
remove the
laundry, the
dryer will stop
automatically at
the end of the
anti-creasing
phase.
The
and
lights remain lit
and the buzzer
sounds every 10
seconds for 2
minutes.
The light of the
button goes
off and a
flashing zero
appears on the
display.
10. Turn the
programme
selector dial to
O
; all the
lights go out.
The appliance is
switched off.
Remove the
laundry.
If you open and
then close the
door before
turning the
programme
selector dial to
O , all the
lights
corresponding
to the phases
making up the
performed
programme
come on and
the display
shows the
duration of the
programme.
After each use
• Clean the filters
(see page 17).
• Empty the water
reservoir (see
page 18).
Important!
If the drying
programme has to
be stopped before it
reaches the end, we
recommend that
you turn the
programme selector
dial to position
and wait until the
end of this phase
before removing the
laundry. This will
avoid a build-up of
P11
49
P1108
