Zanussi ZT 45/30, Instruction Booklet

Page: 16 / 20

16
The refrigerator should be levelled accurately. Adjust
the level of the appliance bu screwing out the
adjustable feet at the bottom of the cabinet using your
fingers.
Before using
Remove all securing tapes. Wash inside the appliance
with lukewarm water and a little bicarbonate of soda
(5 ml to 0.5 litre of water). Do not use soap or deter-
gent as the smell might linger. Dry thoroughly.
Aligning the fridge-freezer top with the other
kitchen units
The appliance comes with the top aligned with the
door. To change the alignment, follow the instructions
below:
Remove the screws (A-Fig.) fixing the rear brackets to
the top; move the top and, having selected the new
position, refit the screws.
Fitting the appliance under the
kitchen work surfaces
This appliance can also be fitted under your existing
kitchen unit tops following the instructions below:
remove the screws (A) fixing the rear brackets (C) to
the top, detach the top from the catches (B) and
remove (see figure).
D200