background image

IMPORTANT SAFETY
INSTRUCTIONS

t

3

It is most important that this instruction book should be retained with the appliance for future
reference. Should the appliance be sold or transferred to another owner, or should you move house and
leave the appliance, always ensure that the book is supplied with the appliance in order that the new
owner can be acquainted with the functioning of the appliance and the relevant warnings.
These warnings are provided in the interest of safety. You must read them carefully before installing or
using the appliance.

General Safety

This appliance is designed to be operated by
adults. Children should not be allowed to tamper
with the controls or play with the product.

It is dangerous to alter the specifications or modify
this product in any way.

Before any cleaning or maintenance work is
carried out, be sure to switch off and unplug the
appliance.

This appliance is heavy. Care should be taken
when moving it.

Ice lollies can cause frost burns if consumed
straight from the appliance.

Service / Repair

Any electrical work required to install this
appliance should be carried out by a qualified
electrician or competent person.

This appliance should be serviced by an
authorised Service Centre, and only genuine
spare parts should be used.

Under no circumstances should you attempt to
repair the appliance yourself. Repairs carried out
by inexperienced persons may cause injury or
more serious malfunctioning. Refer to your local
Service Centre, and always insist on genuine
spare parts.

Use

The domestic refrigerators and freezers are
designed to be used specifically for the storage of
edible foodstuffs only.

Frozen food must not be re-frozen once it has
been thawed out.

Manufacturers’ storage recommendations should
be strictly adhered to. Refer to relevant
instructions.

The inner lining of the appliance consists of
channels through which the refrigerant passes.

If these should be punctured this would damage
the appliance beyond repair and cause food loss.
DO NOT USE SHARP INSTRUMENTS to scrape
off frost or ice. Frost may be removed by using the
scraper provided. Under no circumstances should

solid ice be forced off the liner. Solid ice should be
allowed to thaw when defrosting the appliance.
See defrost instructions.

Do not place carbonated or fizzy drinks in the
freezer as it creates pressure on the container,
which may cause it to explode, resulting in damage
to the appliance. Do not use a mechanical device
or any artificial means to speed up the thawing
process other than those recommended by the
manufacturer. Never use metal objects for cleaning
your appliance as it may get damaged.

Installation

Care must be taken to ensure that the appliance
does not stand on the electrical supply cable.

There are working parts in this product which heat
up. Always ensure that there is adequate
ventilation as a failure to do this will result in
component failure and possible food loss. See
installation instructions.

Parts which heat up should not be exposed.
Wherever possible the back of the product should
be against a wall.

If the appliance has been transported horizontally,
it is possible that the oil contained in the
compressor flows in the refrigerant circuit. It is
advisable to wait at least two hours before
connecting the appliance to allow the oil to flow
back in the compressor.

Environment Protection

This appliance does not contain gasses which
could damage the ozone layer, in either its
refrigerant circuit or insulation materials. The
appliance shall not be discarded together with
the urban refuse and rubbish. Avoid damaging
the cooling unit, especially at the rear near the
heat exchanger. Information on your local
disposal sites may be obtained from your
municipal authorities.

The materials used on this appliance marked
with the symbol 

are recyclable.

Summary of Contents for ZT 140









Reviews: