1
Programme selection
buttons
2
Delay start
button
3
Indicator lights
4
On/Off
button and
On/Off
indicator light
5
Function
buttons
Setting mode
The appliance is in
setting mode
when the On/Off in-
dicator light illuminates and
all
programme lights are
off.
Always remember that when performing the following
operations:
• selecting a washing programme
• setting the water softener
• activating/deactivating the rinse aid dispenser
the appliance
MUST
be in setting mode.
IMPORTANT!
If a programme light is illuminated, the last performed
programme is still set.
In this case the programme has to be cancelled:
Simultaneously press and hold the two
Cancel
buttons
(B and C) until all the programme lights are off. The
programme has been cancelled and the machine is
now in setting mode.
Function
buttons
In addition to the dishwashing programme selection,
the following functions can also be set with the help of
these buttons.
– the setting of the water softener,
– the cancelling of a programme in progress.
Programme selection
buttons
•
Starting the washing programme:
1. Press the On/Off button. On/Off light turns on.
2. Press the button corresponding to the required
programme, the corresponding light illuminates .
The indicator light corresponding to the pro-
gramme and the phase indicator lights foreseen
for that programme will start blinking.
3. After about 3 seconds from the last pressure of a
button the programme starts automatically. Once
the programme has started the phase indicator
lights will turn off except for the phase under way.
IMPORTANT!
Once the programme has started, if you want to
change the selection made you must cancel the wash-
ing programme in progress.
5
