![Zanussi ZRX71100WA User Manual Download Page 18](http://html.mh-extra.com/html/zanussi/zrx71100wa/zrx71100wa_user-manual_939078018.webp)
4.
leave the door/doors open to prevent un-
pleasant smells.
Important!
If the cabinet will be kept on, ask
somebody to check it once in a while to
prevent the food inside from spoiling in case of
a power failure.
What to do if…
Warning!
Before troubleshooting,
disconnect the mains plug from the mains
socket.
Only a qualified electrician or competent
person must do the troubleshooting that is not
in this manual.
Important!
There are some sounds during
normal use (compressor, refrigerant
circulation).
Important!
The appliance operates
discontinuously, so the stopping of
compressor does not mean being no current.
That is why you must not touch the electrical
parts of the appliance before breaking the
circuit.
Problem
Possible cause
Solution
The appliance is noisy
The appliance is not supported
properly
Check if the appliance stands stable
(all the four feet should be on the
floor)
The appliance does not
operate.
The appliance is switched off.
Switch on the appliance.
The mains plug is not connected
to the mains socket correctly.
Connect the mains plug to the
mains socket correctly.
The appliance has no power.
There is no voltage in the mains
socket.
Connect a different electrical appli-
ance to the mains socket.
Contact a qualified electrician.
The compressor operates
continually.
The temperature is not set correct-
ly.
Set a higher temperature.
The door is not closed correctly.
Refer to "Closing the door".
The door has been opened too fre-
quently.
Do not keep the door open longer
than necessary.
The product temperature is too
high.
Let the product temperature de-
crease to room temperature before
storage.
The room temperature is too high.
Decrease the room temperature.
Water flows on the rear
plate of the refrigerator.
During the automatic defrosting
process, frost defrosts on the rear
plate.
This is correct.
The temperature in the ap-
pliance is too low.
The temperature regulator is not
set correctly.
Set a higher temperature.
The temperature in the ap-
pliance is too high.
The temperature regulator is not
set correctly.
Set a lower temperature.
The door is not closed correctly.
Refer to "Closing the door".
18
www.zanussi.com
Summary of Contents for ZRX71100WA
Page 53: ...53 www zanussi com ...
Page 54: ...54 www zanussi com ...
Page 55: ...55 www zanussi com ...