background image

5. If the power plug socket is loose, do not insert the

power plug. There is a risk of electric shock or fire.

6. You must not operate the appliance without the

lamp cover

1)

 of interior lighting.

• This appliance is heavy. Care should be taken when

moving it.

• Do not remove nor touch items from the freezer com-

partment if your hands are damp/wet, as this could

cause skin abrasions or frost/freezer burns.

• Avoid prolonged exposure of the appliance to direct

sunlight.

• Bulb lamps

2)

 used in this appliance are special pur-

pose lamps selected for household appliances use

only. They are not suitable for household room illu-

mination.

Daily Use

• Do not put hot pot on the plastic parts in the appliance.
• Do not store flammable gas and liquid in the appliance,

because they may explode.

• Do not place food products directly against the air

outlet on the rear wall.

3)

• Frozen food must not be re-frozen once it has been

thawed out.

• Store pre-packed frozen food in accordance with the

frozen food manufacturer's instructions.

• Appliance's manufacturers storage recommendations

should be strictly adhered to.

• Do not place carbonated or fizzy drinks in the freezer

compartment as it creates pressure on the container,

which may cause it to explode, resulting in damage to

the appliance.

• Ice lollies can cause frost burns if consumed straight

from the appliance.

Care and cleaning

• Before maintenance, switch off the appliance and dis-

connect the mains plug from the mains socket.

• Before using the appliance for the first time, wash the

interior and all internal accessories with lukewarm wa-

ter and some neutral soap so as to remove the typical

smell of a brand-new product, then dry thoroughly.

• Do not clean the appliance with metal objects.

• Do not use sharp objects to remove frost from the ap-

pliance. Use a plastic scraper.

• Never use a hair drier or other heating appliances to

speed up defrosting. Excessive heat may damage the

plastic interior, and humidity could enter the electric

system making it live.

• Regularly examine the drain in the refrigerator for de-

frosted water. If necessary, clean the drain. If the drain

is blocked, water will collect in the bottom of the ap-

pliance.

Installation

Important!  For electrical connection carefully follow the

instructions given in specific paragraphs.
• Unpack the appliance and check if there are damages

on it. Do not connect the appliance if it is damaged.

Report possible damages immediately to the place you

bought it. In that case retain packing.

• It is advisable to wait at least four hours before con-

necting the appliance to allow the oil to flow back in

the compressor.

• Adequate air circulation should be around the appli-

ance, lacking this leads to overheating. To achieve

sufficient ventilation follow the instructions relevant to

installation.

• Wherever possible the back of the product should be

against a wall to avoid touching or catching warm parts

(compressor, condenser) to prevent possible burn.

• The appliance must not be located close to radiators

or cookers.

• Make sure that the mains plug is accessible after the

installation of the appliance.

• Connect to potable water supply only.

4)

Service

• Any electrical work required to do the servicing of the

appliance should be carried out by a qualified electri-

cian or competent person.

• This product must be serviced by an authorized Service

Centre, and only genuine spare parts must be used.

1) If the lamp cover is foreseen

2) If the lamp is foreseen

3) If the appliance is Frost Free

4) If a water connection is foreseen

 

3

Summary of Contents for ZRG715SW













Reviews: