8
www.zanussi.com
8
EN
Caution!
Any electrical work required to install
this appliance should be carried out by a
qualified electrician or competent person.
Warning!
This appliance must be earthed.
The manufacture declines any liability
should these safety measures not be
observed.
Important!
The wires in the mains lead are colored in
accordance with the following code
Green and Yellow: Earth
Brown:
Live
Blue:
Neutral
As the colours of the wires in the mains lead
of this appliance may not correspond
9. Electrical connection
with the coloured markings identifying the
terminals in your plug, proceed as follows:
1. Connect the wire coloured green and
yellow to the terminal marked either with
the letter "E" or by the earth symbol or
coloured green and yellow.
2. Connect the wire coloured blue to the
termi-nal either marked with the letter "N"
or col-oured black.
3. Connect the wire coloured brown to the
ter-minal either marked with the "L" or
colour-ed red.
4. Check that no cut, or stray strands of
wire is present and the cord clamp is
secure over the outer sheath.
5. Make sure the electricity supply voltage
is the same as that indicated on the
appliance rating plate.
6. Switch on the appliance.
The appliance is supplied with a 13 amp plug
fitted
. In the event of having to change
the fuse in the plug supplied, a 13 amp ASTA
approved (BS 1362) fuse must be used.
Warning!
A cut off plug inserted into a 13 amp socket
is a serious safety
