39
Safety precautions for
isobutane
Warning
The refrigerant of the appliance is isobutane (R600a)
that is inflammable and explosive to a greater extent.
Keep ventilation openings, in the appliance enclosure
or in the built-in structure, clear of obstruction.
Do not use mechanical devices or other means to
accelerate the defrosting process, other than those
recommended by the manufacturer.
Do not damage the refrigerant circuit.
Do not use electrical appliances inside the food stor-
age compartments of the appliance, unless they are
of the type recommended by the manufacturer.
Important safety information
General safety precautions
Keep these instructions and they should remain at the
appliance when moving away or changing owner.
This appliance is designed for storing food, domestic
use and being used according to these instructions
only.
Specialised companies that are qualified to do so
by the manufacturer must carry out service and
repairs including repairing and changing the
power cord.
Accessory parts supplied by them
should be used only for repairing. Otherwise the
appliance can be damaged or can cause other dam-
age or injury.
The appliance is out of circuit only in that case if the
plug is removed from the socket. Before cleaning and
maintenance always unplug it (do not get it by the
cable). If the socket is difficult to reach, switch off the
appliance by cutting off the current.
Power cord must not be lengthened.
Make sure that the power plug is not squashed or
damaged by the back of the fridge/freezer.
- A damaged power plug may overheat and cause a
fire.
Do not place heavy articles or the fridge/freezer
itself on the power cord.
- There is a risk of a short circuit and fire.
Do not remove the power cord by pulling on its
lead, particularly when the fridge/freezer is being
pulled out of its niche.
- Damage to the cord may cause a short-circuit, fire
and/or electric shock.
- If the power cord is damaged, it must be replaced by
a certified service agent or qualified service per-
sonnel.
If the power plug socket is loose, do not insert the
power plug.
- There is a risk of electric shock or fire.
Without the lamp cover of interior lighting you must not
operate the appliance.
When cleaning, do not use sharp, pointed or hard
devices, as they can cause damage to the appliance.
Be careful not to allow liquids to the temperature con-
trol and lighting box.
Do not put hot pot to the plastic parts.
Do not store flammable gas and liquid in the appli-
ance, because they may explode.
Check and clean the outlet of melting water coming
during defrosting regularly - a label inside the appli-
ance warns you for this. If it is clogged the melting
water gathered can cause earlier failure.
Precautions for child safety
Do not allow children to play with the packaging of the
appliance. Plastic foil can cause suffocation.
Adults must handle the appliance. Do not allow chil-
dren to play with it or its controlling parts.
If you are discarding the appliance pull the plug out of
the socket, cut the connection cable (as close to the
appliance as you can) and remove the door to prevent
playing children to suffer electric shock or to close
themselves into it.
Safety precautions for
installation
Put the appliance to the wall to avoid touching or
catching warm parts (compressor, condenser) to pre-
vent possible burn.
When moving the appliance take care of the plug not
to be in the socket.
When placing the appliance take care not to stand it
on the power cord.
Adequate air circulation should be around the appli-
ance, lacking this leads to overheating. To achieve
sufficient ventilation follow the instructions relevant to
installation.
For the safety of life and property keep the
precautions of these user's instructions as
the manufacturer is not responsible for damages
caused by omission.
GB
