background image

Care and cleaning

Caution! Unplug the appliance before carrying out

any maintenance operation.
This appliance contains hydrocarbons in its cooling

unit; maintenance and recharging must therefore

only be carried out by authorized technicians.

Periodic cleaning

The equipment has to be cleaned regularly:
• clean the inside and accessories with lukewarm water

and some neutral soap.

• regularly check the door seals and wipe clean to ensure

they are clean and free from debris.

• rinse and dry thoroughly.
Important! Do not pull, move or damage any pipes and/or

cables inside the cabinet.

Never use detergents, abrasive powders, highly perfumed

cleaning products or wax polishes to clean the interior as

this will damage the surface and leave a strong odour.
Clean the condenser (black grill) and the compressor at

the back of the appliance with a brush. This operation will

improve the performance of the appliance and save elec-

tricity consumption.
Important! Take care of not to damage the cooling system.
Many proprietary kitchen surface cleaners contain chemi-

cals that can attack/damage the plastics used in this appli-

ance. For this reason it is recommended that the outer

casing of this appliance is only cleaned with warm water

with a little washing-up liquid added.

After cleaning, reconnect the equipment to the mains sup-

ply.

Defrosting of the refrigerator

Frost is automatically eliminated from the evaporator of

the refrigerator compartment every time the motor com-

pressor stops, during normal use. The defrost water

drains out through a trough into a special container at the

back of the appliance, over the motor compressor, where

it evaporates.

It is important to periodically clean the defrost water drain

hole in the middle of the refrigerator compartment channel

to prevent the water overflowing and dripping onto the

food inside. Use the special cleaner provided, which you

will find already inserted into the drain hole.

Defrosting of the freezer

The freezer compartment of this model, on the other hand,

is a "no frost" type. This means that there is no buildup of

frost when it is in operation, neither on the internal walls

nor on the foods.

The absence of frost is due to the continuous circulation

of cold air inside the compartment, driven by an automati-

cally controlled fan.

Troubleshooting

Caution! Before troubleshooting, disconnect the

power supply.

Only a qualified electrician or competent person must do

the troubleshooting that is not in this manual.

Important! There are some sounds during normal use

(compressor, refrigerant circulation).

Problem

Possible cause

Solution

The appliance is noisy.

The appliance is not supported prop-

erly.

Check if the appliance stands stable (all

the four feet should be on the floor).

10

 

www.zanussi.com

Summary of Contents for ZRB939NX2

















Reviews: