Zanussi ZRB939NW2 User Manual Download Page 7

To freeze fresh foods, you will need to activate the Action

Freeze function. Press key (D) (several times if necessary)
until 

 indicator appears.

You must confirm the choice by pressing key (E) within

few seconds. You will hear the buzzer and on the display

will appear some animation with lines.

After a pre-cooling period of 24 hours, place the foods in

the freezer.
Place the food to be frozen in the   compartment, as this

is the coldest point.

The freezing process takes 24 hours. During this period

do not put other foods in the freezer.

This function stops automatically after 52 hours.

It is possible to deactivate the function at any time by
pressing key (D) until 

 indicator will flash and then

press key (E).

Drinks Chill Function

The Drinks Chill function is to be used as a safety warning

when placing bottles in the freezer compartment. It is acti-

vated by pressing key (D) (several times if necessary) until
the corresponding icon appears   .

You must confirm the choice by pressing key (E) within

few seconds. You will hear the buzzer and the icon re-

mains lighted.

In this condition it operates a timer with a default value of

30 min. and it could change from 1 to 90 min., by press-

ing key (B) you select the minutes needed.

At the end of the selected time there are the following indi-

cations:

• on the indicator 

 the symbol   flashing

• the icon 

 flashing

• the icon   flashing
• sounding of an acoustic alarm until key (E) is pressed

At this point bear in mind to remove the drinks contained

in the freezer compartment.

It is possible to deactivate the function at any time by

pressing key (D) until the corresponding icon will flash

and then key (E).

Excessive temperature alarm

An increase in the temperature in a compartment (for ex-

ample due to an power failure) is indicated by:
• flashing temperature
• freezer compartment   flashing
• flashing of the icon 
• sounding of buzzer

When normal conditions are restored:
• the acoustic signal shuts off
• the temperature value continues to flash

When you press key (E) to de-activate the alarm, the high-

est temperature reached in the compartment appears on
indicator 

 for some seconds.

Then it returns on the normal operation showing the tem-

perature of the selected compartment.

During the alarm phase, the buzzer can be switched off by

pressing key (E).

First use

Cleaning the interior

Before using the appliance for the first time, wash the inte-

rior and all internal accessories with lukewarm water and

some neutral soap so as to remove the typical smell of a

brand-new product, then dry thoroughly.

Important! Do not use detergents or abrasive powders, as

these will damage the finish.

Daily use

Freezing fresh food

The freezer compartment is suitable for freezing fresh food

and storing frozen and deep-frozen food for a long time.

To freeze fresh food activate the Fast Freezing function at

least 24 hours before placing the food to be frozen in the

freezer compartment.

Place the fresh food to be frozen in the bottom compart-

ment.

The maximum amount of food that can be frozen in 24

hours is specified on the rating plate, a label located on

the inside of the fridge.

The freezing process lasts 24 hours: during this period do

not add other food to be frozen.

After 24 hours, when the freezing process is completed,

deactivate the Fast Freezing function (see "Fast Freezing

function").

 

7

www.zanussi.com

Summary of Contents for ZRB939NW2

















Reviews: