2. Raise the shelf from the rear and push it forward
until it is freed (B).
3. Remove the retainers (C).
Door reversibility
Warning!
Before carrying out any operations,
remove the plug from the power socket.
Important!
To carry out the following operations, we
suggest that this be made with another person that will
keep a firm hold on the doors of the appliance during
the operations.
m3 m4
m5
m1 m2
1
• Open the doors. Un-
screw the middle hinge
(m2). Remove the plas-
tic spacer (m1).
• Remove the doors.
• Remove the left-hand
cover pin of the middle
hinge (m3,m4) and
move to the other side.
• Fit the pin of the middle
hinge (m5) into the left-
hand hole of the lower
door.
• Unscrew the lover
hinge (b1)
• Remove the left-hand
cover pins (b4) and
move to the other side.
• Re-screw the lover
hinge (b1) on the oppo-
site side.
• Unscrew the lower
hinge pivot (b2) and the
spacer (b3) and place
them on the opposite
side.
• Remove the plugs (1)
on the upper side of
both doors and move
them to the other side.
• Re-insert the the lower
door on the lower hinge
pivot (b2).
• Insert the middle hinge
(m2) into the left drill of
the lower door.
• Unscrew the upper
hinge pivot and place it
on the opposite side.
• Fit the upper door on
the upper door pivot.
• Re-insert the upper
door on the middle
hinge pivot (m5) slight-
ly tilting both doors.
• Re-screw the middle
hinge (m2). Do not for-
get the plastic spacer
(m1).
Do a final check to make sure that:
• All screws are tightened.
• The edges of the doors run parallel to the side edge
of the appliance.
• The magnetic seal adheres to the cabinet.
• The door opens and closes correctly.
If the ambient temperature is cold (i.e. in Winter), the
gasket may not fit perfectly to the cabinet. In that case,
wait for the natural fitting of the gasket or accelerate
this process by heating up the part involved with a nor-
mal hair drier.
In case you do not want to carry out the above men-
tioned operations, contact the nearest After Sales Serv-
ice Force. The After Sales Service specialist will carry
out the reversibility of the doors at your cost.
Environmental concerns
The symbol on the product or on its packaging
indicates that this product may not be treated as
household waste. Instead it should be taken to the
appropriate collection point for the recycling of
electrical and electronic equipment. By ensuring this
product is disposed of correctly, you will help prevent
potential negative consequences for the environment
and human health, which could otherwise be caused
by inappropriate waste handling of this product. For
more detailed information about recycling of this
product, please contact your local council, your
13
