background image

MAINTENANCE AND CLEANING

Before any maintenance or cleaning work is
carried out, DISCONNECT the appliance from
the ELECTRICITY supply.

Warning
This appliance contains hydrocarbons in its
cooling unit maintenance and recharging
must therefore only be carried out by
authorised technicians.

Internal cleaning

Clean the inside and accessories with warm water
and bicarbonate of soda (5ml to 0.5 litre of water).
Rinse and dry thoroughly.

NEVER USE DETERGENTS, ABRASIVE
POWDERS, HIGHLY PERFUMED CLEANING
PRODUCTS OR WAX POLISHES, TO CLEAN THE
INTERIOR AS THESE WILL DAMAGE THE
SURFACE AND LEAVE A STRONG SMELL.

Important

Do not use abrasive products.

External cleaning

Wash the outer cabinet with warm soapy water. Do
NOT use abrasive products.
Once or twice a year dust the condenser (black grill)
and the compressor at the back of the appliance, with
a brush or vacuum cleaner, see the figure.
You MUST ensure that the appliance is switched
OFF. An accumulation of dust will affect the
performance of the appliance and cause excessive
electricity consumption.

Changing the light bulb

Should the interior light fail to work, switch off and
disconnect the appliance from the electricity supply.

Replace the bulb as follows:

1. Remove conveyor

2. Unscrew light bulb

3. Replace with a 12 watt bulb available from your 

nearest Service Centre.

4. Replace conveyor

D358

CONDENSER

COMPRESSOR

When the appliance is not in use

When the appliance is not in use for long periods,
disconnect from the electricity supply, empty all foods
and clean the appliance, leaving the door ajar to
prevent unpleasant smells.

D359

8

Summary of Contents for ZR 65/1 SI

















Reviews: