background image

21

USE

Operation

Insert the plug into the wall socket.
Open the refrigerator door and turn the thermostat 
knob, clockwise, beyond the «

O

» (STOP) position.

The appliance will start to operate.

Temperature regulation

The temperature is automatically regulated and can be 
increased to achieve a higher temperature (warmer) 
by rotating the thermostat knob toward lower settings 
or reduced (colder) rotating the knob towards higher 
settings.
However, the exact setting should be chosen keeping 
in mind that the temperature inside the refrigerator 
depends on:

room temperature;

how often the door is opened;

the quantity of food stored;

location of appliance.

A medium setting is generally the most suitable.

To stop operation, simply turn the thermostat knob to 
position «

O

».

Important

If the ambient temperature is high or the 
appliance is fully loaded, and the appliance is set to 
the lowest temperatures, it may run continuously 
causing frost to form on the rear wall. In this case 
the dial must be set to a higher temperature to 
allow automatic defrosting and therefore reduced 
energy consumption.

Fresh food refrigeration

To obtain the best performance:

do not store warm food or evaporating liquids in the 
refrigerator;

do cover or wrap the food, particularly if it has a 
strong flavour.

Position food so that air can circulate freely round it.

Useful hints:

Meat (all types): wrap in polythene bags and place on 
the glass shelf above the vegetable drawer(s).
For safety, store in this way only one or two days at 
the most.

Cooked foods, cold dishes, etc..: these should be 
covered and may be placed on any shelf.

Fruit and vegetables: these should be thoroughly 
cleaned and placed in the special drawer(s) provided.

Butter and cheese: these should be placed in special 
airtight containers or wrapped in aluminium foil or 
polythene bags to exclude as much air as possible.

Milk bottles: these should have a cap and should be 
stored in the bottle rack on the door.

Bananas, potatoes, onions and garlic, if not 
packed, must not be kept in the refrigerator.

GB

Summary of Contents for ZR 170 UN













Reviews: