37
Fitting the front panel
(Fig. 4)
The overall dimensions of the covering front panel
should be 1-2 mm smaller than those of the door, and
the thickness should not exceed 4 mm.
With the refrigerator door closed, release the self-
tapping screws securing the removable side of the
door frame.
Take off this removable side and slide in the
covering panel after slackening the remaining
screws around the door frame.
Push the covering panel all the way in, then re-
fasten the frame to the door, refitting the previously
removed door frame side.
Fig. 4
D149
Characteristics of the recess
Air flows through the ventilation slits in the lower
part of the frame.
To ensure proper air circulation, though, a
«chimney» has to be provided at the back of the
cabinet: it should be at least 50 mm deep and
540 mm wide (Fig. 5).
The ventilation opening must also be maintained
between the upper part (top) of the cabinet and the
ceiling.
Air must be able to circulate freely through the
system.
Fig. 5
Fitting the appliance into the recess
Fit the appliance into the recess, positioning it in
the centre.
Using the four screws supplied with the appliance,
secure the four angle brackets of the appliance
cabinet to the recess unit.
1446
560
550
50
540
D252
