2. Turn the knob slowly to the symbol until you
can hear a click. The two cooking zones are on.
3. To set the necessary heat setting refer to "Heat
settings".
CLOCK FUNCTIONS
CLOCK FUNCTIONS TABLE
Clock function
Application
TIME OF DAY
To set, change or check the time of day.
DURATION
To set how long the appliance operates.
END
To set when the appliance deactivates.
TIME DELAY
To combine DURATION and END function.
MINUTE MINDER
To set countdown time. This function has no effect on the opera-
tion of the appliance. You can set the MINUTE MINDER at any
time, also when the appliance is off.
SETTING THE TIME. CHANGING THE TIME
You must set the time before you operate the oven.
The flashes when you connect the appliance to
the electrical supply, when there was a power cut
or when the timer is not set.
Press the or to set the correct time.
After approximately five seconds, the flashing stops
and the display shows the time of day you set.
To change the time of day press again and
again until starts to flash.
SETTING THE DURATION
1. Set an oven function and temperature.
2. Press again and again until
starts to
flash.
3. Press or to set the DURATION time.
The display shows
.
4. When the time ends,
flashes and an
acoustic signal sounds. The appliance
deactivates automatically.
5. Press any button to stop the acoustic signal.
6. Turn the knob for the oven functions and the
knob for the temperature to the off position.
SETTING THE END
1. Set an oven function and temperature.
2. Press again and again until
starts to
flash.
3. Press or to set the time.
The display shows
.
4. When the time ends,
flashes and an
acoustic signal sounds. The appliance
deactivates automatically.
5. Press any button to stop the signal.
6. Turn the knob for the oven functions and the
knob for the temperature to the off position.
SETTING THE TIME DELAY
1. Set an oven function and temperature.
2. Press again and again until
starts to
flash.
3. Press or to set the time for DURATION.
4. Press .
5. Press or to set the time for END.
6. Press to confirm.
Appliance turns on automatically later on, works for
the set DURATION time and stops at the set END
time. At the set time an acoustic signal sounds.
7. The appliance deactivates automatically. Press
any button to stop the signal.
8. Turn the knob for the oven functions and the
knob for the temperature to the off position.
8
