Zanussi ZOHNC2X2, User Manual, Page: 16 / 24

NOTES ON CLEANING
Cleaning
Agents
Clean the front of the appliance only with a microfibre cloth with warm water and a
mild detergent. Clean and check the door gasket around the frame of the cavity.
Use a cleaning solution to clean metal surfaces.
Clean stains with a mild detergent.
Everyday
Use
Clean the cavity after each use. Fat accumulation or other residue may cause fire.
Moisture can condense in the appliance or on the door glass panels. To decrease
the condensation, let the appliance work for 10 minutes before cooking. Do not
store the food in the appliance for longer than 20 minutes. Dry the cavity only with
a microfibre cloth after each use.
Accessories
Clean all accessories after each use and let them dry. Use only a microfibre cloth
with warm water and a mild detergent. Do not clean the accessories in a dishwash-
er.
Do not clean the non-stick accessories using abrasive cleaner or sharp-edged ob-
jects.
HOW TO REMOVE: SHELF SUPPORTS
Remove the shelf supports to clean the oven.
Step 1 Turn off the oven and wait until it
is cold.
Step 2 Pull the front of the shelf support
away from the side wall.
Step 3 Pull the rear end of the shelf
support away from the side wall
and remove it.
2
1
Step 4 Install the shelf supports in the
opposite sequence.
The retaining pins on the tele-
scopic runners must point to the
front.
HOW TO USE: AQUA CLEAN
This cleaning procedure uses humidity to remove
remaining fat and food particles from the oven.
Step 1 Pour water into the cavity emboss-
ment: 150 ml.
Step 2
Set the function: .
Step 3 Set the temperature to 90 °C.
Step 4 Let the oven work for 30 min.
Step 5 Turn off the oven.
Step 6 Wait until the oven is cold. Dry the
cavity with a soft cloth.
16