USING YOUR OIL FILLED RADIATOR
Page 11
MANUAL OPERATION
1. Before connecting your appliance to the mains socket,
position the appliance upright on the floor, at least 100cm
away from the wall, away from curtains, furniture or wall
coverings.
2. Insert the mains plug into a suitable 13 amp mains socket.
3. Turn on the power switch on the left hand side of the unit.
4. Press the power button on the unit or the power button
on the remote control to power on the unit. The
temperature of the unit will be at its highest setting.
5. Press the mode button on the unit or the remote control
and select the heat setting you require. The appliance has
3 power settings and the indicator light on the display will
light up for each setting.
Power Control Position
ZOFR5003
Low heat ON
800W
Medium heat ON
1.2kW
High heat ON
2.0kW
6.
Select the required temperature by using the ‘+’ and ‘
-
’
buttons on the unit or the remote control. It is
recommended to select the highest temperature to pre
heat the appliance. It will take 5 - 10 minutes for the
appliance to fully heat up. The thermostat has a range of
15
⁰
C - 35
⁰
C.
7. When the room reaches the desired temperature, the
radiator will cycle off and turn on again when the
temperature drops.
