Setting the clock functions
For Duration and End , set an oven
function and temperature. This is not necessary
for the Minute Minder . Refer to "Setting an
oven function".
1. Press again and again until the symbol
for the necessary clock function and
flashes.
2. Press or to set the necessary clock
function.
The display shows the flashing symbol for the
clock function you set. When the set time ends,
the symbol flashes and an acoustic signal
sounds for two minutes.
With the Duration and End
functions, the appliance deactivates
automatically.
3. Press a button to stop the signal.
4. Deactivate the appliance.
Cancelling the clock functions
1. Press again and again until the symbol
for the necessary clock function and
flash in the display.
2. Press and hold the button until an
acoustic signal sounds or the display shows
00:00.
Using the accessories
WARNING!
Refer to Safety chapters.
Inserting the accessories
Wire shelf:
Push the shelf between the guide bars of the
shelf support and make sure that the feet point
down.
Deep pan:
Push the deep pan between the guide bars of
the shelf support.
Wire shelf and the deep pan together:
Push the deep pan between the guide bars of
the shelf support and the wire shelf on the
guide bars above and make sure that the feet
point down.
Small indentation at the top increase
safety. The indentations are also
anti-tip devices. The high rim around
the shelf prevents cookware from
slipping of the shelf.
www.zanussi.com
9
