Zanussi ZOB 899, Instruction Booklet

Page: 15 / 22

15
Figure 15 . Tightly hold with both hands the second innner
glass “E” and remove it from its original position too
by making it slipping off.
After removing the inner glass, clean the oven door and
the glasses.
We recommend to clean the oven door using only a wet
sponge and dry it up after cleaning with a soft cloth. Never
use steel wool, acids or abrasive products as they can
damage the oven surface.
After cleaning, place the two inner glasses back in its
original position.
To correctly mount the inner glass “E” (without
stripes along the sides) the white dot visible in the
glass should appear in the top right angle of the
glass itself.
To correctly mount the inner glass “D” (with stripes
along the sides) the surface marked with stripes
has to face the oven door in a way that, when
touching the surface on sight, the light roughness
of the silk-screen printing is not perceptible.
After placing the inner glasses back, insert support “C”
in its position and, then:
Figure 16 . place the right end of the aluminium bar “A”
in the proper slot located in support “C”.
Figure 17 : place the left end of the aluminium bar “A” in
the proper slot located in support “B”. Now, insert
support “B” in its original position and make sure the
assembly is well fixed and stable.
E
A
C
A
B
Fig. 15
Fig. 16
Fig. 17
Models in stainless steel or aluminium:
We recommend to clean the oven door using only a wet
sponge and dry it up after cleaning with a soft cloth.
Never use steel wool, acids or abrasive products as they
can damage the oven surface. Clean the oven control
panel following the same precautions.
It is possible to revert the oven door.
This operation must be carried out ONLY by an
authorised and competent person.
It is recommendable that customers do not carry
out this operation themselves.
The Oven door gasket
The correct operation of the oven is ensured by a gasket
placed round the edge of the oven cavity.
• Periodically check the condition of this gasket. If
necessary, clean it without using abrasive cleaning
products.
• If the gasket shows to be damaged , call you local
Service Centre. Do not use the oven until it has been
repaired.