background image

10

SOMETHING NOT WORKING

Symptom

No power to the appliance

The light does not come on 

The temperature in the fridge

The compressor runs continously

Noise

Water under the salad crispers

Solution

Check there is power at the socket.

Check there is not a power cut by checking the
household lights.

Check the fuse has not blown.

Ensure that the bulb is correctly fitted.

Replace the bulb if it has blown.

Check the door light switch is not jammed.

Check the thermostat control knob in the fridge is
turned to the correct setting relative to ambient
conditions.

Check the ambient temperature is within the
appliance’s operating limits, please refer to the
installation section in this instruction book.
Relocate the appliance if necessary.

Adjust the thermostat control knob to give correct
temperature control. See “Setting the temperature”.

Check that the door is closed.

Large quantities of food have recently been placed in
the cabinet and/or door is frequently opened.

Check that air ventilation is not obstructed.

Refer to normal operating sounds.

Check the drain hole is not blocked. (see
Maintenance and Cleaning).

If the appliance is not working correctly, please carry out the following checks before contacting your local
Zanussi Service Force Centre

If after the above checks your appliance still does not operate correctly, contact your local Zanussi Service
Force Centre.

Please note that it will be necessary to provide proof of purchase for any in-guarantee service calls.

In-guarantee customers should ensure that the above checks have been made, as the engineer will
make a charge if the fault is not a mechanical or electrical breakdown.

11

CUSTOMER CARE DEPARTMENT

In the event of your appliance requiring service, or if you wish to purchase spare parts, please contact your
local Zanussi Service Force Centre by telephoning:- 

0 8 7 0   5   9 2 9 9 2 9

Your telephone call will be automatically routed to the Service Force Centre covering your post code area. 

For the address of your local Service Force Centre and further information about Service Force, please visit the
website at www.serviceforce.co.uk

Before calling out an engineer, please ensure you have read the details under the heading ‘Something Not
Working?

When you contact the Service Force Centre you will need to give the following details:

1.

Your name, address and post code

2.

Your telephone number

3.

Clear and concise details of the fault

4.

The model and serial number of the appliance (found on the rating plate)

5.

The purchase date

Please note that a valid purchase receipt or guarantee documentation is required for in-guarantee
service calls. 

For general enquiries concerning your Zanussi appliance or for further information on Zanussi products, 

please contact our Customer Care Department by letter or telephone at the address below or visit our website
at www.zanussi.co.uk

Customer Care Department 

Zanussi

55-77 High Street

Slough

Berkshire

SL1 1DZ

Tel: 08705 727 727 (*) 

* calls to this number may be recorded for training purposes.

SERVICE AND SPARE PARTS

Summary of Contents for ZLA 99 W





















Reviews: