background image

11

Something not working

Problems may be due to causes which can easily be solved before calling the Thecnical Service.

Please follow these instructions:

Problem

Cause

Solution

A) INTERNAL LIGHT

1.Inner Light (Refrigerator

• Appliance unplugged.

• Plug the appliance in.

Compartment does not 

• Product not switched on.

• Switch on.

work.

• No power supply reaching the • Check the main fuse box of your

fridge.

house.

• The bulb is not fitted properly

• Screw it in properly or fit a new

or has fused.

bulb.

B) PERFORMANCE

1. The appliance does not 

• Doors not properly closed.

• Close the doors.

cool down sufficiently.

• A door has been opened

• Avoid frequent opening if

frequently.

possible.

• Temperature control in

• Change position as required.

inappropriate position.

• Food has been introduced.

• The appliance will cool down in

due course.

2.Food gets frozen in the

• Temperature control in 

• Change position as required.

fridge.

incorrect position.

• Food too close to ventilation

• Leave a small gap.

holes at the back.

3.The motor does not stop

• Temperature control in 

• Change as required.

working.

incorrect position.

• Door not properly closed.

• Close door correctly.

• Doors opened frequently.

• Avoid if possible.

• Food has been loaded recently.

• Wait for the appliance to come

back to normal.

• Condensor dirty.

• Clean (read section on cleaning

the condensor).

Summary of Contents for ZKN20
















Reviews: