•
: problem with the water draining.
•
: door open.
Once the problem has been eliminated, press
the button
7
to restart the programme. If after
all checks, the problem persists, contact your
local Service Centre.
Problem
Possible cause/Solution
The washing machine does
not start:
The door has not been closed.
• Close the door firmly.
The plug is not properly inserted in the power socket.
• Insert the plug into the power socket.
There is no power at the socket.
• Please check your domestic electrical installation.
The main fuse has blown.
• Replace the fuse.
The selector dial is not correctly positioned and/or the button
7
has not
been pressed.
• Please turn the selector dial and press the button
7
again.
The delay start has been selected.
• If the laundry are to be washed immediately, cancel the delay start.
The Child Safety Lock has been activated.
• Deactivate the Child Safety Lock.
The machine does not fill:
The water tap is closed.
• Open the water tap.
The inlet hose is squashed or kinked.
• Check the inlet hose connection.
The filter in the inlet hose or in the inlet valve filter are blocked.
• Clean the water inlet filters (see ‘Cleaning the water inlet filters’ for
more details).
The door is not properly closed.
• Close the door firmly.
The machine fills then emp-
ties immediately:
The end of the drain hose is too low.
• Refer to relevant paragraph in «Water drainage» section.
The machine does not empty
and/or does not spin:
The drain hose is squashed or kinked.
• Check the drain hose connection.
The drain filter is clogged.
• Clean the drain filter.
An option or a programme that ends with the water still in the tub or that
eliminates all the spinning phases has been selected.
• Select the draining or spinning programme.
The laundry is not evenly distributed in the drum.
• Redistribute the laundry.
22
www.zanussi.com
Summary of Contents for ZKH7146J
Page 1: ...EN User manual Washer Dryer ZKH 7146 J ...
Page 30: ...30 www zanussi com ...
Page 31: ...31 www zanussi com ...
