Zanussi ZITN646K User Manual Download Page 9

5. DAILY USE

WARNING!

Refer to Safety chapters.

5.1 Activating and deactivating

Touch   for 1 second to activate or

deactivate the hob.

5.2 Automatic Switch Off

The function deactivates the hob

automatically if:
• all cooking zones are deactivated,

• you do not set the heat setting after you

activate the hob,

• you spill something or put something on

the control panel for more than 10

seconds (a pan, a cloth, etc.). An acoustic

signal sounds and the hob deactivates.

Remove the object or clean the control

panel.

• the hob gets too hot (e.g. when a

saucepan boils dry). Let the cooking zone

cool down before you use the hob again.

• you use incorrect cookware. The symbol

 comes on and the cooking zone

deactivates automatically after 2 minutes.

• you do not deactivate a cooking zone or

change the heat setting. After some time

 comes on and the hob deactivates.

The relation between the heat setting and

the time after which the hob deactivates:

Heat setting

The hob deactivates

after

, 1 - 2

6 hours

3 - 4

5 hours

5

4 hours

6 - 9

1.5 hour

5.3 Selecting the cooking zone

To select a cooking zone touch the sensor
field   corresponding to this zone. The
display shows the heat setting ( ).

You can use the left rear zone to prepare

coffee. Make sure you use a moka pot

suitable for induction hobs.

5.4 The heat setting

Set the cooking zone.

Touch   to increase the heat setting. Touch

 to decrease the heat setting. Touch 

and   at the same time to deactivate the

cooking zone.

5.5 PowerBoost

This function makes more power available to

the induction cooking zones. The function

can be activated for the induction cooking

zone only for a limited period of time. After

this time the induction cooking zone

automatically sets back to the highest heat

setting.

Refer to “Technical data”

chapter.

To activate the function for a cooking

zone: first set the cooking zone and than set
the maximum heat setting. Touch   until 

comes on.

To deactivate the function: touch  .

5.6 Lock

You can lock the control panel while cooking

zones operate. It prevents an accidental

change of the heat setting.
Set the heat setting first.

To activate the function: touch  . 

comes on for 4 seconds.

To deactivate the function: touch  . The

previous heat setting comes on.

When you deactivate the hob,

you also deactivate this function.

5.7 Child Safety Device

This function prevents an accidental

operation of the hob.

ENGLISH

9

Summary of Contents for ZITN646K

















Reviews: