background image

• Fats and oil when heated can release flammable

vapours. Keep flames or heated objects away

from fats and oils when you cook with them.

• The vapours that very hot oil releases can cause

spontaneous combustion.

• Used oil, that can contain food remnants, can

cause fire at a lower temperature than oil used

for the first time.

• Do not put flammable products or items that are

wet with flammable products in, near or on the

appliance.

WARNING! Risk of damage to the

appliance.

• Do not keep hot cookware on the control panel.

• Do not put a hot pan cover on the glass surface

of the hob.

• Do not let cookware boil dry.

• Be careful not to let objects or cookware fall on

the appliance. The surface can be damaged.

• Do not activate the cooking zones with empty

cookware or without cookware.

• Do not put aluminium foil on the appliance.

• Cookware made of cast iron, aluminium or with

a damaged bottom can cause scratches on the

glass / glass ceramic. Always lift these objects

up when you have to move them on the cooking

surface.

• This appliance is for cooking purposes only. It

must not be used for other purposes, for

example room heating.

CARE AND CLEANING

WARNING! Do not remove the

buttons, knobs or gaskets from the

control panel. Water may get inside

the appliance and cause damage.

• Clean the appliance regularly to prevent the

deterioration of the surface material.

• Deactivate the appliance and let it cool down

before you clean it.

• Disconnect the appliance from the electrical

supply before maintenance.

• Do not use water spray and steam to clean the

appliance.

• Clean the appliance with a moist soft cloth. Use

only neutral detergents. Do not use abrasive

products, abrasive cleaning pads, solvents or

metal objects.

SERVICE
• To repair the appliance contact the Authorised

Service Centre.

• Use original spare parts only.

DISPOSAL

WARNING! Risk of injury or

suffocation.

• Contact your municipal authority for information

on how to discard the appliance correctly.

• Disconnect the appliance from the mains

supply.

• Cut off the mains electrical cable close to the

appliance and dispose of it.

INSTALLATION

WARNING! Refer to Safety chapters.

BEFORE THE INSTALLATION
Before you install the hob, write down the

information below from the rating plate. The rating

plate is on the bottom of the hob.

Model .......................................

PNC .........................................

Serial number ...........................

BUILT-IN HOBS
Only use the built-in hobs after you assemble the

hob into correct built-in units and work surfaces

that align to the standards.

CONNECTION CABLE
• The hob is supplied with a connection cable.

• To replace the damaged mains cable, use the

cable: H05BB-F or H03V2V2-F which

withstands a temperature of 90 °C or higher.

5

Summary of Contents for ZITN320X

















Reviews: