11
The tumble dryer does not start
●
The door has not been closed.
●
The plug is not properly inserted in the power
socket.
●
There is no current at the socket
●
The main fuse or the fuse in the plug has blown.
●
A drying time has not been selected.
Drying takes too long or laundry is not dry
enough.
●
The laundry has not been spun properly.
●
The filter is clogged up.
●
The room temperature is too high.
●
The selected time or sector was not suitable for
the laundry
●
There is too much laundry inside the appliance.
●
The dryer is not correctly installed.
●
The Low Temperature Button has been
depressed.
Something Not Working
Symptom
Possible causes
Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without
calling out an engineer. Before contacting your local Service Centre, please carry out the checks listed below.
IMPORTANT: if you call out an engineer to a fault listed below, or to repair a fault caused by incorrect
use or installation, a charge will be made even if the appliance is under guarantee.
If, after the above checks, there is still a fault, call
your local Zanussi Service Centre.
Please make sure you give the model and serial
number of the appliance.
This information can be found on the rating plate.
P
0
3
0
7
Mod. ...
Prod. No. ........
Ser. No. ............
125983210.qxp 2006-01-06 11:56 Page 11
