background image

46

CONTENTS

Warnings 

45

Use 

47

Cleaning the interior 

47

Operation

47

Temperature regulation

47

Fresh food refrigeration

47

Freezing fresh food

48

Storage of frozen food

48

Thawing

48

Ice-cube production

48

Movable shelves

49

Positioning the door shelves

49

CrispÕn fresh

49

Hints

50

hints for refrigeration

50

Hints for freezing

50

Hints for storage of frozen food

50

Maintenance

51

Periodic cleaning

51

Periods of no operation

51

Interior light

51

Defrosting

51

Customer service and spare parts

52

Technical information

53

Installation

53

Location

53

Electrical connection

53

Changing the opening direction of the doors

54

Instructions for totally built-in

54

¥

Do not place carbonated or fizzy drinks in the
freezer as it creates pressure on the container,
which may cause it to explode, resulting in
damage to the appliance. Do not use a
mechanical device or any artificial means to
speed up the thawing process other than those
recommended by the manufacturer. Never use
metal objects for cleaning your appliance as it
may get damaged.

Installation

¥  During normal operation, the condenser and

compressor at the back of the appliance heat up
considerably. For safety reasons, minimum
ventilation must be as shown in the relevant
Figure.

Attention: keep ventilation openings clear of
obstruction.

¥  Care must be taken to ensure that the appliance

does not stand on the electrical supply cable

Important: 

if the supply cord is damaged, it must

be replaced by a special cord or assembly
available from the manufacturer or its service
agent.

¥  There are working parts in this product which

heat up. Always ensure that there is adequate
ventilation as a failure to do this will result in
component failure and possible food loss. See
installation instructions.

¥  Parts which heat up should not be exposed.

Wherever possible the back of the product
should be against a wall.

¥  If the appliance has been transported

horizontally, it is possible that the oil contained in
the compressor flows in the refrigerant circuit. It
is advisable to wait at least two hours before
connecting the appliance to allow the oil to flow
back in the compressor.

Environment Protection

This appliance does not contain gasses which
could damage the ozone layer, in either its
refrigerant circuit or insulation materials. The
appliance shall not be discarded together with
the urban refuse and rubbish. Avoid damaging
the cooling unit, especially at the rear near the
heat exchanger. Information on your local
disposal sites may be obtained from municipal
authorities. The materials used on this appliance
marked by the symbol  

are recicable.

Summary of Contents for ZI 9250 DA














Reviews: