19
MAINTENANCE
Unplug the appliance before carrying out any maintenance
operation.
Periodic cleaning
Never use metal objects for cleaning your appliance
as it may get damaged.
Clean the inside with warm water and bicarbonate
of soda.
Rinse and dry thoroughly.
Periods of non-operation
When the appliance is not in use for long periods,
take the following precautions:
remove the plug from the wall socket;
remove all food;
defrost and clean the interior and all accessories;
leave the door ajar to allow air to circulate to
prevent unpleasant smells.
Interior light
The light bulb inside the refrigerator compartment
can be reached as follows:
“
unscrew the light cover securing screws;
“
unhook the moving part by pressing it as shown
in the figure.
If the door is open and the light does not come on,
check that the bulb is properly screwed in; if it still
does not work, replace the bulb with one of the
same power.
The maximum rating is shown on the light cover.
Fig. 16
D411
SERVICING
If the appliance is not functioning properly check
that:
the plug is firmly in the wall socket and the mains
power switch is on;
there is no power failure; the control knob is in the
right position.
If there is water on the fridge bottom, make sure
the defrost water drain hole is not clogged (Fig. 14).
To do this, use the cleaner provided which can be
found in the drain hole.
If your appliance is still not working properly after
making the above checks, contact your local dealer
or the nearest service center.
To obtain fast service, it is essential that when you
apply for it you specify the model and serial number
of your appliance which can be found on the
warranty certificate or inside the appliance on the
rating plate.
