Zanussi ZI 1451, Instruction Booklet

Page: 8 / 12

8
Door reversibility
The applianceÕs door has been locked in position for
transport by means of pins on both sides. According
to the door opening direction, remove relevant pins
at the top (A) and at the bottom (B).
Warning!
If the ambient temperature is cold (i.e. in
Winter), the gasket may not fit perfectly to the
cabinet. In that case, wait for the natural fitting
of the gasket or accelerate this process by
heating up the part involved with a normal
hairdrier.
D480
B
A
Dimensions of the recess
Height of housing (1) 702 mm
Depth of housing (2) 550 mm
Width of housing (3) 560 mm
It is necessary that the niche is provided with a
conduct of ventilation having the following
dimensions:
Depth
50 mm
Width 540 mm
Under a worktop
To ensure adequate ventilation, follow the
instructions in the figure.
The appliance door must be about 20 mm lower than
the worktop.
Building-in
PR0
540
50
3
2
1
min 200cm
2
560 min
600
20
702
20 50
550 min
560 min
D474
1. Push the appliance into the recess, making sure
that it
is set back 7 mm from the edge of the base
recess.
D475