Zanussi ZHC 932 Operating And Installation Instructions Download Page 7

39

Unpacking

Check that the cooker hood is not damaged.
Transportation damages
should immediately be reported to the transport
company. Damages, faults and missing parts should
immediately be reported to the retailer.
Dispose carefully of the packaging material so that
it is out of the way of small children.

Position

The cooker hood should be mounted freely hanging
on the wall. The cooker hood must be at least 60
cm above electric hobs or electric ranges, or at least
75 cm above gas burners or gas ranges.

The cooker hood cannot be connected to
flues of other appliances that run on
energy sources other than electricity.
Please, keep to the provisions of official
directives regarding fume discharge.

Electrical connection

The hood has a power cable with earth connection
and the rated voltage is 220-240V.

Assembling the chimney flue support/bracket
(3 parts):

The three parts should be fixed with 4 screws, the
support extension is adjustable and should
correspond to the internal width of the telescopic
chimney flue.

Installation

Min

75 cm

Min

60 cm

Fig. 5

Special accessories

Charcoal filter

PNC 942 120 892

Technical specifications

ZHC 932

ZHC 632

Size (cm)

Height

81,8/114,8

81,8/114,8

Width

89,9

69,9

Depth

51,5

51,5

Light

2 x 40W

2 x 40W

Grease filter

3

2

Voltage

220-240V

220-240V

Total power

260W

260W

=

=

X

X

Fig. 6

Summary of Contents for ZHC 932













Reviews: