Zanussi ZHC 916X, Instruction Booklet

Page: 17 / 24

17
Fixing the chimney
a) Loosen the screws M fixing the two parts of the
chimney and pull the inner section I ( Fig. 21 )
almost all the way out. Remove the protective film
P .
b) Rest the lower section of the chimney in its housing
on the top of the hood canopy. Lower the ducting
fan unit until it reaches the wall bracket
S and fix
it using the screw H provided ( Fig. 22 ).
Fit cover D provided on the wall bracket S ( Fig.
23 ).
c) Fix the chimney A to the hood canopy C using
four screws provided ( Fig. 24 ).
d) Insert the transparent seal Q provided, so as to
eliminate any play between the two parts of the
chimney (
Fig. 25 ). Lock the screws M .
e) Remove the support rod B .
Ducting or re-circulation fitting
1. Ducting fitting:
This is possible in all forms of installation.
a) Connect the air outlet to the external ducting
system.
b) Remove the activated charcoal filter (if fitted)
i
n side the hood canopy (See Maintenance and
Cleaning).
2. Re-circulation fitting:
This is only possible with the air outlet directed
upwards. Fit the venting grille
G onto the air outlet
( Fig. 26 ). The activated charcoal filter should be
fitted inside the hood canopy afte r connect
ion
.
INSTALLATION INSTRUCTIONS
21
A08_20
M
I
P
22
A08_21
S
S
H
23
A08_22
D
24
E E
E
E
B
25
A08_24
Q Q
26
S07_23
G