background image

5

Something Not Working?

If the hob is not working correctly, please carry out the following checks before contacting your local Service Force
Centre.

IMPORTANT

: If you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use

or installation, a charge will be made even if the appliance is under guarantee.

   SYMPTOM

There is no spark when lighting the gas

The gas ring burns unevenly

  

 SOLUTION

Check that the unit is plugged in and the electrical

supply is switched on

Check that the RCCB has not tripped (if fitted)

Check the mains fuse has not blown

Check the burner cap and crown have been

replaced correctly, e.g. after cleaning.

Check the main jet is not blocked and the burner

crown is clear of food particles.

Check the burner cap and crown have been

replaced correctly, e.g. after cleaning.

Service and Spare Parts

In the event of your appliance requiring service, or if
you wish to purchase spare parts, please contact your
local Service Force Centre by telephoning:

0870 5 929929

Your telephone call will be automatically routed to the
Service Force Centre covering your post code area.

For the address of your local Service Force Centre and
further information about Service Force, please visit
the website at www.serviceforce.co.uk

Before calling out an engineer, please ensure you have
read the details under the heading “Something Not
Working.”
When you contact the Service Force Centre you will
need to give the following details:
1. Your name, address and post code
2. Your telephone number
3. Clear and concise details of the fault
4. The model and serial number of the appliance (found

on the rating plate)

5. The purchase date

Please note that a valid purchase receipt or
guarantee documentation is required for in-
guarantee service calls.

For Customer Service in the Republic of Ireland please
contact us at the address below:
Zanussi-Electrolux
Electrolux Group (Irl) Ltd
Long Mile Road
Dublin 12
Republic of Ireland
Tel: +353 (0) 1 4090 751
Email: [email protected]

Summary of Contents for ZGG 6420

















Reviews: