background image

5

Gas Burners Rating

Ultra Rapid Burner (Triple crown)

4,0  kW

Rapid Burner (big)

2,8  kW

Semirapid Burner (medium)

2,0 kW

Auxiliary Burner (small)

1,0  kW

Class 3 Appliance

Category

II2H3B/P

Setting

Natural Gas G20  20 mbar

Gas connection

G  1/2"

Electric Supply

230 V 

~

  50 Hz

Hob recess dimensions

Length

560 mm.

Width

480 mm.

Periodic Maintenance

Periodically ask your local Service Centre to check the
conditions of the gas supply pipe and the pressure
adjuster, if fitted.
To ensure the good operation of the hob and its safety
features, it is necessary that the taps are periodically
lubricated.

Technical Data

This machine, before leaving the factory, has been
tested and studied by many experts and specialists, in
order to give you the best results.

Any repair work which needs to be carried out should
be done with the utmost care and attention.

For this reason we recommend that for any problem
you contact the dealer who sold it to you, or our nearest
authorized Service Centre, specifying the nature of the
problem, the appliance model (Mod.), the product
number (Prod. No.) and the serial number (Ser. No.)
marked on the identification plate.

Original spareparts, certified
by the product manufacturer
and carrying this symbol are
only available at our Service
Centre and authorized spareparts shops.

Service and original spare parts

Summary of Contents for ZGF 786












Reviews: