Zanussi ZGF 692 C, Instruction Booklet

Page: 8 / 32

8
When switching on the mains, after installation or a power cut, it is quite
normal for the spark generator to be activated automatically.
In the absence of electricity In the absence of electricity
In the absence of electricity In the absence of electricity In the absence of electricity, ignition can occur without the electrical
device; in this case, approach the burner with a flame, push the relevant
knob down and turn it anti-clockwise until it reaches the maximum position.
If the control knobs become difficult to turn, please contact your local
Service Force Centre.
Using the Wok Stand (only for Using the Wok Stand (only for
Using the Wok Stand (only for Using the Wok Stand (only for
Using the Wok Stand (only for
model ZGF 692 C, ZGF 692 CT) model ZGF 692 C, ZGF 692 CT)
model ZGF 692 C, ZGF 692 CT) model ZGF 692 C, ZGF 692 CT) model ZGF 692 C, ZGF 692 CT)
A wok stand is provided to enable you to use a
round bottomed wok on the hob. The wok stand
must only be used on the triple crown burner,
and should not be used with any other type of
wok or pan. When fitting the wok stand, ensure
the recesses in the frame fit securely onto the bars
of the pan supports, as shown in the picture
.
Using the hob correctly Using the hob correctly
Using the hob correctly Using the hob correctly Using the hob correctly
To ensure maximum burner efficiency, it is strongly recommended that you
use only pots and pans with a flat
flat
flat flat
flat bottom fitting the size of the burner used,
so that flame will not spread beyond the bottom of the vessel (see the table
below).
Burner minimum maximum
diameter diameter
Triple crown 180 mm 260 mm
Large (rapid) 180 mm 260 mm
Medium (semi-rapid) 120 mm 220 mm
Small (auxiliary) 80 mm 160 mm