background image

2

Important Safety Information

You MUST read hese warnings carefully before installing or using the hob. If you need assistance, contact

our  local  Customer  Care  Department

Installation

l

This hob must be installed by qualified personnel,

according to the manufacturer’s instructions and to

the relevant Australian Standards.

l

Any gas installation must be carried out by a registered

installer.

l

Remove all packaging before using the hob.

l

Ensure that the gas and electrical supply complies

with the type stated on the rating plate, located near

the gas supply pipe.

l

Do not attempt to modify the hob in any way.

l

The appliance must be installed at a minimum distance

of cm.50 from curtains or other combustible material.

l

Where this appliance is installed in marine craft or in
caravans, it shall not be used as a space heater.

Child Safety

l

The appliance is not intended for use by young children

or infirm persons without supervision.

l

This hob is designed to be operated by adults. Do

not allow children to play near or with the hob.

l

The hob gets hot when it is in use.

l

Children should be kept away until it has cooled.

l

Children can also injure themselves by pulling pans

or pots off the hob.

During Use

l

This hob is intended for domestic cooking only. It is

not designed for commercial or industrial purposes.

l

When in use a gas cooking appliance will produce

heat and moisture in the room in which it has been

installed. Ensure there is a continuous air supply,

keeping air vents in good condition or installing a

cooker hood with a venting hose.

l

When  using  the  hob  for  a  long  period  time,  the

ventilation should be improved, by opening a window

or increasing the extractor speed.

l

Do not use this hob if it is in contact with water.

Do not operate the hob with wet hands.

l

Ensure the control knobs are in the ‘OFF’ position

when not in use.

l

When using other electrical appliances, ensure the

cable  does  not  come  into  contact  with  the  hot

surfaces of the cooking appliance.

l

Unstable or misshapen pans should not be used on

the hob as unstable pans can cause an accident by

tipping or spillage.

l

Never leave the hob unattended when cooking with

oil and fats.

l

Never use plastic or aluminium foil dishes on the hob.

l

Perishable food, plastic items and areosols may be

affected by heat and should not be stored above or

below the hob unit.

l

Do not spray areosols in the vicinity of this appliance
while it is in operation.

Service

l

This hob should only be repaired or serviced by an

authorised  Service  Engineer  and  only  genuine

approved spare parts should be used.

 Environmental Information

l

After installation, please dispose of the packaging

with due regard to safety and the environment.

l

When disposing of an old appliance, make it unusable,

by cutting off the cable.

Keep this instruction book for future reference

and ensure it is passed on to any new owner.

Guide to Use the instructions

The following symbols will be found in the text to guide

you throughout the Instructions:

Safety Instructions

Step by step instructions for an operation

Hints and Tips

Environmental Information

F

All manuals and user guides at all-guides.com

Summary of Contents for ZGF 681













Reviews: