background image

12

Something Not W

Something Not W

Something Not W

Something Not W

Something Not Working?

orking?

orking?

orking?

orking?

If the hob is not working correctly, please carry out the following checks
before contacting your local Service Force Centre.

   SYMPTOM

   SYMPTOM

   SYMPTOM

   SYMPTOM

   SYMPTOM

$

There is no spark when
lighting the gas.

$

The gas ring burns unevenly.

      SOLUTION

SOLUTION

SOLUTION

SOLUTION

SOLUTION

%

Check that the unit is plugged
in and the electrical supply is
switched on.

%

Check that the RCCB has not
tripped (if fitted).

%

Check the mains fuse has not
blown.

%

Check the burner cap and
crown have been replaced
correctly, e.g. after cleaning.

%

Check the main jet is not
blocked and the burner crown
is clear of food particles.

%

Check the burner cap and
crown have been replaced
correctly, e.g. after cleaning.

If after all these checks, your hob still does not operate correctly, contact
your local Service Force Centre.

Please note that it will be necessary to provide proof of purchase for any in-
guarantee service calls.

In-guarantee customers should ensure that the above checks have been
made as the engineer will make a charge if the fault is not a mechanical or
electrical breakdown.

Summary of Contents for ZGF 642

































Reviews: