background image

Service and Spare Parts

In the event of your appliance requiring service, or if
you wish to purchase spare parts please contact
your local Zanussi Service Force Centre by
telephoning:

0870 5 929929

Your call will be routed to the Service Force Centre
covering your post code area. The address of your
local Service Force Centre is detailed in the 
accompanying Customer Care Book.

Before calling out an engineer, please ensure you
have read the details under the heading ‘Something
Not Working?’

When you contact the Service Centre you will need
to give the following details.

1. Your name, address and post code

2. Your telephone number

3. Clear and concise details of the fault

(found on the rating plate)

4. The model serial no. of the appliance (found on

the rating plate)

5. The purchase date

Customer Care Department

For general enquiries concerning your Zanussi appliance or for further information on Zanussi products, you
are invited to contact our Customer Care Department by letter or telephone as follows:

Customer Care Department
Zanussi
Zanussi House
Hambridge Road
Newbury
Berkshire
RG14 5EP

Tel: 01635 521313

12

Summary of Contents for ZFT 51/2 R

















Reviews: