www.zanussi.com
37
FR
Anomalie
Cause possible
Solution
Les aliments
ne sont pas
suffisamment
congelés
Le thermostat n’est pas correcte-
ment réglé.
Reportez-vous au chapitre « Bandeau de
commande ».
La porte a été ouverte plus long-
temps que nécessaire.
Ne laissez la porte ouverte que le temps
nécessaire.
Trop de produits chauds ont été
placés dans l’appareil au cours
des dernières 24 heures.
Modifiez la position du thermostat pour
obtenir plus de froid.
L’appareil est installé près d’une
source de chaleur.
Reportez-vous au chapitre « Emplace-
ment ».
Accumulation
de givre sur le
joint de porte
Le joint de la porte n’est pas
étanche à l’air.
Chauffez la partie concernée à l’aide d’un
sèche-cheveux (en position de froid).
Aidez manuellement le joint à reprendre
sa position naturelle.
Bruits inhab
-
ituels
L’appareil n’est pas de niveau.
Réglez de nouveau les pieds.
L’arrière de l’appareil est appuyé
contre un mur ou d’autres objets.
Déplacez légèrement l’appareil.
Un composant, par ex. un tuyau
situé à l’arrière de l’appareil
touche un autre composant ou le
mur.
Si nécessaire, pliez le tuyau pour le
dégager.
Si l’anomalie persiste, prenez contact avec le
service aprèsvente.
Les informations suivantes sont nécessaires
pour pouvoir vous offrir une aide rapide et
adaptée. Vous trouverez ces informations sur la
plaque signalétique située sur l’appareil.
Les caractéristiques techniques figurent sur la
plaque signalétique située sur le côté gauche à
l’intérieur de l’appareil et sur l’étiquette d’énergie.
Description du
modèle
(Mod.)
Référence du
produit
(PNC)
Numéro de série
(S.N.)
Dimensions
Hauteur
1440mm
Largeur
554mm
Profondeur
570mm
Autonomie de fonctionne-
ment
11 heures
Caractéristiques techniques
Summary of Contents for ZFP19500WA
Page 40: ...www zanussi com shop ...