4
INSTALLATION
Caution
If this appliance featuring magnetic door seals is to
replace an older appliance having a spring lock (latch)
on the door or lid, be sure to make that spring lock
unusable before you discard the old appliance. This
will prevent it from becoming a death-trap for a child.
Location
The appliance should be installed well away from
sources of heat such as radiators, boilers, direct
sunlight etc.
Best performance is obtained with ambient
temperature b18
°
C and +43
°
C (class T);
+18
°
C and +38
°
C (class ST); +16
°
C and +32
°
C (class
N); +10
°
C and +32
°
C (class SN).
The class of your appliance is shown on its rating
plate.
Make sure that there is nothing at the back, at the top
and at the bottom of the appliance to obstruct air
circulation.
For a more efficient operation of the appliance, the
minimum distance between the top of the appliance
and other overhanging kitchen furniture, if any,
should be at least 100 mm (see Fig. 1 - A).
However, the best solution would be that shown in
Fig. 1 - B with no overhanging furniture.
Two adjustable feet make it possible to accurately
level the appliance.
Rear spacers
(Fig. 2)
In the plastic envelope containing the Operating
Instructions are also included two wall spacers to be
fitted into the special openings provided on the back
of the appliance.
Push-fit the spacers into the openings, making sure
that arrow (A) is positioned as per Fig. 2 and then turn
the spacers through 45
°
until they lock in (arrow (A)
in a vertical position).
Fig. 1
Fig. 2
NP003
A
B
100 mm
10 mm
10 mm
D039
A
45°
GB
