background image

The appliance is supplied with a 13 amp fuse

(B). In the event of having to change the fuse in

the plug supplied, a 13 amp ASTA approved

(BS 1362) fuse must be used.

WARNING!

A cut off plug inserted into a 13 amp

socket is a serious safety (shock)

hazard. Ensure that it is disposed of

safely.

Ventilation requirements

The airflow behind the appliance must be

sufficient.

1. Put the freezer in horizontal position on a

firm surface. The cabinet must be on all four

feet.

2. Make sure that the clearance between the

appliance and rear wall is 5 cm.

3. Make sure that the clearance between the

appliance and the sides is 5 cm.

Technical information

Technical data

 

 

 

Height

mm

868

Width

mm

946

Depth

mm

665

Rising time

Hours

32

Voltage

Volts

230 - 240

Frequency

Hz

50

The technical information are situated in the

rating plate on the external side of the appliance

and in the energy label.

ENVIRONMENT CONCERNS

Recycle the materials with the symbol  . Put

the packaging in applicable containers to

recycle it. Help protect the environment and

human health and to recycle waste of electrical

and electronic appliances. Do not dispose

appliances marked with the symbol   with the

household waste. Return the product to your

local recycling facility or contact your municipal

office.

www.zanussi.com

11

*

Summary of Contents for ZFC26500WA













Reviews: