23
MAINTENANCE
Unplug the appliance before carrying out any
maintenance operation.
Periodic cleaning
Never use metal objects for cleaning your appliance
as it may get damaged.
Clean the inside with warm water and bicarbonate of
soda.
Rinse and dry thoroughly.
Periods of non-operation
When the appliance is not in use for long periods, take
the following precautions:
remove the plug from the wall socket;
remove all food;
defrost and clean the interior and all accessories;
leave the door ajar to allow air to circulate to prevent
unpleasant smells.
Interior light bulb
The light bulb inside the refrigerator compartment can
be reached as follows:
ª
unscrew the light cover securing screws;
ª
unhook the moving part by pressing it as shown in
the figure.
If the door is open and the light does not come on,
check that the bulb is properly screwed in; if it still
does not work, replace the bulb with one of the same
power.
The maximum rating is shown on the light cover.
Fig. 8
D411
SERVICING
If the appliance is not functioning properly check
that:
the plug is firmly in the wall socket and the mains
power switch is on;
there is no power failure; the control knob is in the
right position.
Furthermore, if the appliance seems too noisy check
that the sides are not touching furniture that can
transmit or amplify noise or vibration. Also, check
that the refrigerant unit does not vibrate.
If there is water on the fridge bottom, make sure the
defrost water drainage hole is not clogged (Fig. 7).
To clean the drainage hole use the special cleaner
provided, which you will find already inserted into the
hole.
If your appliance is still not working properly after
making the above checks, contact your local dealer or
the nearest service center.
To obtain fast service, it is essential that when you
apply for it you specify the model and serial
number of your appliance which can be found on
the warranty certificate or inside the appliance on
the rating plate.
GB
GB