3
MAINTENANCE
Unplug the appliance before carrying out any
maintenance operation.
Periodic cleaning
Wash the interior with lukewarm water and sodium
bicarbonate, and clean the painted components with
silicone wax; clean the condenser and the motor
compressor with a brush or a vacuum cleaner. This
operation will improve the operation of the
appliance and save energy.
Idle periods
During periods when the appliance is not used, you
should take the following precautions:
remove the plug from the wall socket;
remove all food from the appliance;
defrost and clean the interior and all accessories;
leave the door slightly open, thus letting air
circulate and preventing the formation of mould and
unpleasant smells.
Replacing the interior light bulb
The light inside the refrigerator compartment is
easy to get at through the opening in the light
holder.
If the light does not go on when the door is open,
check that it is screwed into place properly.
If it still does not light up, change the bulb.
The rating is shown on the light bulb cover.
Fig. 14
D055
SERVICING
If the appliance is not functioning properly check
that:
the plug is firmly in the wall socket and the mains
power switch is on;
there is no power failure; the control knob is in the
right position.
Furthermore:
if the appliance seems too noisy check that the sides
are not touching furniture that can transmit or
amplify noise or vibration. Also, check that the
refrigerant unit does not vibrate.
If there is water on the fridge bottom, make sure
the defrost water drainage hole is not clogged
(Fig. 12).
If your appliance is still not working properly after
making the above checks, contact your local dealer
or the nearest service center.
To obtain fast service, it is essential that when you apply for it
you specify the model and serial number of your appliance
which can be found on the warranty certificate or on the
rating plate, on the bottom left side of the refrigerator
compartment.
19
