Zanussi ZEV6240FBA, User Manual, Page: 7 / 16

Heat
setting
Use to: Time Hints
2-3 Simmer rice and milkbased dishes, heating
up ready-cooked meals 25-50
min Add the minimum twice as much liquid
as rice, mix milk dishes part procedure
through
3-4 Steam vegetables, fish, meat 20-45
min Add some tablespoons of liquid
4-5 Steam potatoes 20-60
min Use max. ¼ l water for 750 g of pota-
toes
4-5 Cook larger quantities of food, stews and
soups 60-150
min Up to 3 l liquid plus ingredients
6-7 Gentle fry: escalope, veal cordon bleu, cut-
lets, rissoles, sausages, liver, roux, eggs,
pancakes, doughnuts as nec-
essary Turn halfway through
7-8 Heavy fry, hash browns, loin steaks, steaks 5-15 min Turn halfway through
9 Boil large quantities of water, cook pasta, sear meat (goulash, pot roast), deep-fry chips
Information on acrylamides
Important! According to the newest scientific
knowledge, if you brown food (specially the one
which contains starch), acrylamides can pose a
health risk. Thus, we recommend that you cook
at the lowest temperatures and do not brown
food too much.
Care and cleaning
Clean the appliance after each use.
Always use cookware with clean bottom.
Scratches or dark stains on the glass-ce-
ramic cause no effect on how the appli-
ance operates.
To remove the dirt:
1. – Remove immediately: melted plastic,
plastic foil, and food with sugar. If not,
the dirt can cause damage to the appli-
ance. Use a special scraper for the
glass . Put the scraper on the glass sur-
face at an acute angle and move the
blade on the surface .
– Remove after the appliance is suffi-
ciently cool:
limescale rings , water
rings, fat stains, shiny metallic discolora-
tions. Use a special cleaning agent for
glass ceramic or stainless steel.
2. Clean the appliance with a moist cloth and
some detergent.
3. At the end rub the appliance dry with a
clean cloth.
Troubleshooting
Problem Possible cause Remedy
You cannot activate the appliance
or operate it. The appliance is not connected to
an electrical supply or it is con-
nected incorrectly. Check if the appliance is correctly
connected to the electrical supply
(refer to connection diagram).
Activate the appliance again and
set the heat setting in less than 10
seconds.
7
www.zanussi.com