background image

31

Forks and spoons should be placed in the removable cutlery
basket with the handles facing downwards and the knives with
their handles facing upwards. 
If the handles protrude from the bottom of the basket,
obstructing the lower spray arm, load the cutlery with the
handles facing upwards.

Mix spoons with other cutlery
to prevent them from sticking
together.

For best results we
recommend you to use the
cutlery grids provided (if the
size and dimensions of the
cutlery allow it).

The cutlery basket is in two
parts which can be separated
to give greater loading
flexibility. To separate the two
parts, slide them horizontally
in opposite directions and
pull them apart. To
reassemble, reverse the
procedure.

The upper basket 

The upper basket is designed for plates (dessert plates,
saucers, dinner plates of up to 26 cm in diameter), salad
bowls, cups and glasses. 
Arrange items on and
underneath the cup racks so
that water can reach all
surfaces. 
Glasses with long stems can
be placed upside down in the
cup racks.
For taller items, the cup racks
can be folded upwards.
Light items (plastic bowls
etc.) must be loaded in the
upper basket and arranged
so they do not move. 

In case that plates are loaded in the upper
basket:

load them starting from the
rear positions of the basket;
tilting them slightly
forwards and avoiding the
front positions near the
door.

Before closing the door, ensure that the spray arms can
rotate freely. 

Adjusting the height of the upper basket 

If washing very large plates you can load them in the lower
basket after moving the upper basket to the higher position. 

To move to the higher position proceed as
follows:

1. Pull out the basket until it stops. 

2. Carefully lift both sides upwards until the mechanism is 

engaged and the basket is stable. 

Attention!

Never lift or lower the
basket on one side only

When the basket is in the
higher position you will not
be able to use the cup
rack(s).

To lower the basket to the original position
proceed as follows:

1. Pull out the basket until it stops. 

2. Carefully lift both sides upwards and then allow the 

mechanism to drop back down slowly, keeping hold of it. 

After loading your machine always close the door, as an
open door can be a hazard.

With upper basket raised

22 cm

33 cm

With upper basket lowered

26 cm

29 cm

Maximum height of the dishes in

upper basket

lower basket

UI63

UI62

US47

US71

US73

RC08

Summary of Contents for ZDT8453






















Reviews: