CANCEL PROCEDURE
Use CANCEL to:
• Cancel a currently running programme.
• Stop the countdown of Delay option.
• Bring the appliance back to the programme
selection mode.
To CANCEL:
Press and hold CANCEL until the control panel
indicates the appliance is in the programme
selection mode.
USER MODE
Settings available in the user mode:
• The level of the water softener according to the
water hardness.
• Activation or deactivation of the rinse aid empty
notification.
• Activation or deactivation of the acoustic signal
indicating the end of a programme.
• Activation or deactivation of AirDry.
Before entering the user mode, make sure the
appliance is in the programme selection mode.
To enter the user mode:
Press and hold simultaneously
and
for at
least 3 seconds.
The indicators:
,
,
, and
start flashing.
As the appliance stores the saved settings, there is
no need to configure it before every cycle.
ADJUSTING THE WATER SOFTENER
Make sure the appliance is in user mode.
1. Press
.
• The indicators
,
and
are off.
• The indicator
still flashes.
• The display shows the current setting: e.g.
= level 5.
2. Press
to change the setting. Each pressing
of the button
increases the level number by
one. After reaching level 10, the count starts
from level 1
3. Press the on/off button to confirm the setting.
If you use multi-tablets containing salt
and the hardness of your water is
lower than 21°dH, you can set the
lowest water softener level. It
deactivates the salt refill indicator.
If you use standard detergent or
multitablets without salt, set the proper
water hardness level to keep the salt
refill indicator active.
THE WATER HARDNESS TABLE
German degrees
(°dH)
French degrees
(°fH)
mmol/l
Clarke degrees
Water softener
level
47 - 50
84 - 90
8.4 - 9.0
58 - 63
10
43 - 46
76 - 83
7.6 - 8.3
53 - 57
9
37 - 42
65 - 75
6.5 - 7.5
46 - 52
8
29 - 36
51 - 64
5.1 - 6.4
36 - 45
7
23 - 28
40 - 50
4.0 - 5.0
28 - 35
6
19 - 22
33 - 39
3.3 - 3.9
23 - 27
5
1)
15 - 18
26 - 32
2.6 - 3.2
18 - 22
4
11 - 14
19 - 25
1.9 - 2.5
13 - 17
3
4 - 10
7 - 18
0.7 - 1.8
5 - 12
2
<4
<7
<0.7
< 5
1
2)
1) Factory setting
2) Do not use salt at this level.
7
Summary of Contents for ZDT26030FA
Page 1: ...GETTING STARTED EASY User Manual ZDT26030FA EN User Manual Dishwasher ...
Page 18: ...18 ...
Page 19: ...19 ...
